How do I configure my iCT220/250 terminal's network settings?

  1. To return to the home screen, press Clear (red button). 
  2. Press .;#* (punctuation key).
  3. Type the admin password, then press Enter (green button). 
  4. Note: The default password is 1234567F. 
  5. Press (Setup menu), then press (Communication). 
  6. Press 3 (Ethernet), followed by (TerminalSetup), then press 2 (Static IP).
  7. Configure the terminal's static IP information:
    • To enter the terminal's IP address:
      1. Press (TerminalIP).
      2. Using the keypad, type the IP address.
      3. Press Enter (green button).
    • To enter the terminal's gateway IP address:
      1. Press (GatewayIP)
      2. Using the keypad, type the gateway IP address.
      3. Press Enter (green button).
    • To enter the terminal's IP subnet mask:
      1. Press (IPSubMask)
      2. Using the keypad, type the subnet mask.
      3. Press Enter (green button).
    • To enter the terminal's primary DNS IP address:
      1. Press (PriDNSIP).
      2. Using the keypad, type the primary DNS IP address.
      3. Press Enter (green button).
    • To enter the terminal's secondary DNS IP address:
      1. Press (SecDNSIP).
      2. Using the keypad, type the secondary DNS IP address.
      3. Press Enter (green button).
  8. Press Clear (red button). The terminal reboots.

Modified on: Wed, 14 Nov, 2018 at 5:43 AM